Announcement

**MarnochS** · 09-04-2019, 03:40 AM

Thanks Guys,

Taking a moment to assemble the bits and pieces.....and am Enjoying the view.

Guess I better get going on that left wing tip winglet.

**Swiss1** · 09-06-2019, 10:31 PM

What Beer Scott?

**gunny11** · 09-07-2019, 02:58 AM

Now I'm really loving it! Really liking your version Scot...

**MarnochS** · 09-13-2019, 01:34 PM

Stuka-Effektmodul

**MarnochS** · 09-15-2019, 12:47 AM

Modified Stits lite process begins - modified as in the PolyTak is thinned 3:1 and then two coats are brushed on to the surfaces that you want to glue down. Then fabric is glued down by passing a paper towel saturated with Polyfiber thinner over the fabric laying on the coated surface.

Bottom first as the top/sides piece will wrap around to the bottom to hide the seem.

Then the top and sides

Trimming the edges and ...... almost makes me consider a see-thru type of color scheme -
With the dorsal fin installed.

Attached Files

**MarnochS** · 09-15-2019, 12:54 AM

Winglet support structure installation before wing covering.

**MarnochS** · 09-16-2019, 02:08 PM

wax paper around the tube works great for making wing tubes, just the right amount of clearance.

Attached Files

**gunny11** · 09-16-2019, 02:50 PM

Outstanding work Scot! Love what you are doing...

**MarnochS** · 09-18-2019, 01:57 PM

One of the minor things, Tail wheel control.

The Robart control arm is thicker than a standard Klevis connector ....and then I remembered I had some Robart control horns with thicker connectors ends ( for my ......uhmmmmm...........1/3......Schweizer 2-33........)

**lenb** · 09-18-2019, 10:47 PM

[the Robart control arm is thicker than a standard Klevis connector ....and then I remembered I had some Robart control horns with thicker connectors ends ( for my ......uhmmmmm...........1/3......Schweizer 2-33........)
[/QUOTE]

Ah, just use them on the Smelly, you won't need those for a while on the 2-33.

**MarnochS** · 09-28-2019, 02:42 AM

Profile sanding the wingtip winglet and fiberglassing the Left tip winglet airfoil.

Covering the wing and shrinking to 300 F in 25 degree increments

Cutting the overlap worked pretty good

PolyTak was applied around the servo cover / landing gear openings before covering, then after shrinking, thinner was applied around the area to glue it down.

Attached Files