Hangar 9 ASW-20

[dbarrym]

It is 100mm deep 90mm from rear edge. 140mm wide at front edge. About 65mm deep at front. 180mm wide at the rear about 70mm from the end which is the widest part of tub.

Thanks Arup! Appreciate it. Does the HH ASW use a belly hook (per scale) or a nose hook?

Cheers,

Barry

[ARUP]

Oh... if this will fit then give me a shout. I can make a glass tub for you. I can deliver it to an event or you pay postage but otherwise it will be free! The plastic tub I have has been used many times to pull glass parts and is starting to craze but I think I can get one or two more from it.

[Tom]

Thanks Arup! Appreciate it. Does the HH ASW use a belly hook (per scale) or a nose hook?

Cheers,

Barry

Belly hook because it’s setup for a electric prop drive in the nose.

[lenb]

you should be able to get the nose release from IFLYTAILIES

https://www.iflytailies.com/store/tow-releases/

LEN

[N4088K]

NIB at its new home. I covered your address Len 😉

[N4088K]

Time to shop for batteries and I’m guessing a new charger.
I’m planning LiFe 6.6v packs, totally new to me, I’m looking for a reputable supplier/brand. Weight isn’t an issue as I need the nose weight.

[Swiss1]

You can call The Model Box, 205 978 8787, we keep LiFe 2200, 3000 and 4000mah 2S, we also stock the smart Chargers Single and Dual!

Jeremy

SCC AAA TT TN

[N4088K]

My order arrived sat, thank you