Announcement

**MarnochS** · 10-31-2021, 05:05 PM

10% left to do.............

Now on to engine and avionics installation

**jgallacher** · 10-31-2021, 11:49 PM

Isn't that the hard part? Looks beautiful Scott

**Swiss1** · 11-01-2021, 12:44 PM

Nice Job Scott!

Jeremy

SCC

AAA TT TN

**yyz** · 11-01-2021, 11:26 PM

Another masterpiece, Scott. Great job!

**MarnochS** · 11-02-2021, 10:31 PM

Thanks All - it was very motivating assembly. - just wish i could find some 12" PR Brush wheels to complete the look.

Meanwhile .....adding some easier access to the top hatch via CamLoc 2700 studs and receptacles.

**Terminal Eagle** · 11-11-2021, 02:04 AM

Extreme Flight

https://northwestrc.com/PMT--262mm-Inflatable-Bushwheels_p_3369.html

Extreme Flight

Hey Scott these are light and BIG!!

**MarnochS** · 11-11-2021, 03:27 PM

Thanks .....mine are arriving on Saturday......they should simulate 26" Goodyear tundra tires at 40%
I'll make some hub caps too. Found some pictures while searching the web.

Scott

**MarnochS** · 11-14-2021, 11:19 PM

Hub Caps for the PMT 262 Bush Wheels - using the stock wheels as a form.....

Added 5% to the completions schedule - smaller rotor from HPI will fit nicely ( shredder valve clearance on the PMT Wheels ).........

**MarnochS** · 11-18-2021, 01:19 PM

Cut down the wheel adaptor plate from Aviation Concepts Bidule Brake kit and drilled, along with the 1/8" spacer......extra holes in the other adaptor plate due to mis-alignment of the alignment jig.......

**MarnochS** · 11-25-2021, 02:06 PM

Working on the Flap servo installation
Need about 20mm of pushrod travel for full flap deployment so the servo arm ball link attachment hole was moved in so I can have full servo arm movement.

75 degrees of deflection should be good enough to slow things down

**MarnochS** · 12-05-2021, 03:32 PM

Lights.....I think I need a different landing light cover than the one that glues over the top

Movie build Sunday selection.....

**MarnochS** · 12-05-2021, 11:39 PM

Wheel hub cap came out passable - Rust-Oleum Bright Coat Metallic Finnish Aluminum
44 mm carbon tube.....just have to make sure to have the axel installed before installing the hub cap --- its a smug fit.