Lunak LF-107 3.7m

[N4088K]

I can use the pull pull hardware...

[N4088K]

Thanks for the detailed pictures, it helps a lot. I’ll bring the coffee for shop time.

[N4088K]

I was referring to “up close” as “in person”, I’m just getting into scale gliders, I’m trying to learn....

[N4088K]

I need to see some of these up close.

[N4088K]

Looks good, I have never been good at coming up with trim schemes....

[N4088K]

Just a little reality check, is 2 pounds of weight up in the front normal to get it to balance? That was the gross number and I know a percentage of that...

[N4088K]

Thanks, no haven’t seen those, I see a lot of potential with some of the things we have available now.

A long way from “make the fuse...

[N4088K]

This is the section on the Cherokee plan showing the elevator cable/linkage...

[N4088K]

It has a tube that passes through with locator pins. Screw on one side to secure it.

On the full scale Cherokee II and my J2, it’s just...

[N4088K]

Mocked up the servo tray, seat pan/stick. Working out the elevator linkage, seriously considering installing a joiner and driving it with a cable loop....

[N4088K]

Thanks for all the information.
The “plan” is to knock some of the rust off the fingers ( I had to learn to how to do a lot of things over again...

[N4088K]

Thanks
I’ll be working on the servo set up tonight.
I’m still getting over how much room there is inside these things, could stuff an...

[N4088K]

Thank you
yes the directions definitely date themselves. But it also gives me an idea of what torque range servos I’m looking for.
I want...

[N4088K]

Thanks,
just printed them, only took 2 hours to get all the old masking tape off…
Found the instrument panel so I think I’ll order that....

[N4088K]

Time to buy servos for the first time in 10 or so years. Approx. how much torque is required for servos in a model this size?

Thanks Tom,...