Search Result

[mlachow]

At Cumberland I had just finished the Mucha enough for flying. It was still missing graphics. Time for a trip to the local Makerspace at my library....

[mlachow]

Great video at Torrey.



Who wants to try it at Cumberland?...

[mlachow]

Plenty of flights for the year. Soaring at Cumberland, Salem, Muncy, Black Dirt. It doesn't take that much space. Finally some slope on Sunday at the...

[mlachow]

For anyone interested in more cockpit pictures or the early production canopy design, check out the UK site.

https://scalesoaring.co.uk/...

[mlachow]

Since the Castle controller isn't compatible with JR Telemetry, I put in a SM-Modellbau Unisense. This goes inline between the battery and the speed...

[mlachow]

Covering and radio install was completed. CG around 120mm. The instructions called for 11 to 12cm.

The first flights were off winch launch....

[mlachow]

Wing surfaces and elevators are now all hinged. Servo mounts are there but the servos aren't mounted.

The fuselage is almost covered. Just...

[mlachow]

Some progress on covering the wing and the tail. White Oratex. Now the wing and stab are ready for hinging and servo installations....

[mlachow]

Planning what to pack in the van already. I don't think the Mucha will be finished....

[mlachow]

8 months later, the project is still alive. I finally put servo mounts in the stab for the elevators and now the stab and elevators are covered.
...

[mlachow]

Some things to note besides the obvious camber presets.

The aileron to rudder mix changed quite a bit for the lower speed modes.
...

[mlachow]

Did you set up the telemetry from the YGE controller. It's nice to have the actual battery pack voltage. I can't believe they recommended a 3s or...

[mlachow]

Get a piece of tubing that the TEK probe slides into. Cut a piece of wood the shape inside the fuselage and drill a hole through it. Glue that tube...

[mlachow]

The RC Electronics April 2023 newsletter is out.

Check out https://www.rc-electronics.eu/Newsletter_04_2023.pdf

If you visit...

[mlachow]

First flights at the Cumberland Spring event. It was a little nose heavy and needed some up trim. The model handles well and has a reasonable speed...