Announcement

Collapse
No announcement yet.

Pilot-RC 33% Bergfalke II/55

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Installing the Elevator servos in the Stab. Using some G10 0.020 and 0.030 material to frame up the servo bays
    WestSystem/Colloidal Silica mix to stick thing together.
    Click image for larger version

Name:	IMG_3033.JPG
Views:	422
Size:	122.8 KB
ID:	2480 Click image for larger version

Name:	IMG_3032.JPG
Views:	434
Size:	88.2 KB
ID:	2479 Click image for larger version

Name:	IMG_3028.JPG
Views:	417
Size:	73.4 KB
ID:	2483 Click image for larger version

Name:	IMG_3037.JPG
Views:	425
Size:	82.6 KB
ID:	2484
    Attached Files

    Comment


    • #17
      This is beautiful, thank you for the updates. I've added these links to the scale documentation section for the Bergfalke.

      Cheers, Thompson

      Comment


      • #18
        Looking good Thompson, keep up the good work!

        Comment


        • #19
          In keeping with hanger rash avoidance protocol, here's my rendition of Dan's ( QuebecAerotowAssociation.com) Bergfalke fuselage transportation rig.
          Of course the main feature is keeping the wing rods with the fuselage...............I guess I'll have to make a leash for the stab ........

          Click image for larger version

Name:	IMG_3061.JPG
Views:	432
Size:	120.1 KB
ID:	3963 Click image for larger version

Name:	IMG_3062.JPG
Views:	436
Size:	134.7 KB
ID:	3964

          Comment


          • #20
            Servos in the Stab update

            Click image for larger version

Name:	IMG_3043.JPG
Views:	432
Size:	111.2 KB
ID:	4193 Click image for larger version

Name:	IMG_3045.JPG
Views:	421
Size:	53.4 KB
ID:	4194 Click image for larger version

Name:	IMG_3046.JPG
Views:	405
Size:	75.6 KB
ID:	4195
            Click image for larger version

Name:	IMG_3063.JPG
Views:	423
Size:	100.3 KB
ID:	4196 Click image for larger version

Name:	IMG_3066.JPG
Views:	413
Size:	78.8 KB
ID:	4197 Click image for larger version

Name:	IMG_3065.JPG
Views:	420
Size:	81.4 KB
ID:	4198
            Click image for larger version

Name:	IMG_3067.JPG
Views:	446
Size:	55.5 KB
ID:	4199 Click image for larger version

Name:	IMG_3069.JPG
Views:	398
Size:	102.8 KB
ID:	4200 Click image for larger version

Name:	IMG_3070.JPG
Views:	419
Size:	106.4 KB
ID:	4201

            if I need to get to the servos, I'll just cut the Ultracote and then just tape it back on.

            Scott

            Comment


            • #21
              Spoilers.....

              As luck would have it, my laser cut spoiler attachment holes didn't line up
              Click image for larger version

Name:	IMG_3073.JPG
Views:	414
Size:	78.0 KB
ID:	4526


              so out came the 90 degree dremel attachment and a grinder to get things lined up ( with the spoiler taped in place )

              Click image for larger version

Name:	IMG_3074.JPG
Views:	402
Size:	96.7 KB
ID:	4527 Click image for larger version

Name:	IMG_3080.JPG
Views:	397
Size:	54.1 KB
ID:	4528

              This left a bit a play in the movement of the spoiler's action with the enlarged holes, so out came the G10 .060 material and some epoxy.

              Click image for larger version

Name:	IMG_3076.JPG
Views:	404
Size:	69.2 KB
ID:	4529 Click image for larger version

Name:	IMG_3075.JPG
Views:	420
Size:	81.9 KB
ID:	4530

              And of course, some longer 4mm socket head bolts (longer shank ) so the spoiler isn't moving on a threaded surface.

              Scott

              Comment


              • #22
                Cockpit wiring and Tow Release

                In an attempt to keep from shredding the tow loop, I installed a sleeve on the 4mm bolt
                Click image for larger version

Name:	IMG_3020.JPG
Views:	394
Size:	42.0 KB
ID:	4604 Click image for larger version

Name:	IMG_3059.JPG
Views:	394
Size:	56.0 KB
ID:	4605

                trying to keep the wiring under control with 5/8" wing tube sockets
                I think I'll convert over to a Jeti SPS20 electronic switch with a magnetic key since the canopy is bolted on
                Click image for larger version

Name:	IMG_3049.JPG
Views:	407
Size:	51.6 KB
ID:	4606 Click image for larger version

Name:	IMG_3052.JPG
Views:	389
Size:	109.7 KB
ID:	4607 Click image for larger version

Name:	IMG_3057.JPG
Views:	419
Size:	75.3 KB
ID:	4608

                Comment


                • #23
                  Lots of fun flying the Bergfalke....seems to excel at low altitude thermals, spent lots of time at 100-150m just putting around.
                  Click image for larger version

Name:	Capture2.JPG
Views:	199
Size:	128.0 KB
ID:	4674


                  Some formation flying with an Gary McCartney' big Phoenix Models ASK-21 Click image for larger version

Name:	Capture3.JPG
Views:	198
Size:	124.2 KB
ID:	4672
                  Click image for larger version

Name:	Capture4.JPG
Views:	164
Size:	126.9 KB
ID:	4673


                  Click image for larger version

Name:	image_1459.jpg
Views:	370
Size:	143.8 KB
ID:	4671
                  Attached Files
                  Last edited by MarnochS; 10-19-2015, 04:56 PM.

                  Comment


                  • #24
                    Awesome Scott. The colors really jump out on film. Its such a pleasure to see two pilots and the detail like you do. So often guys show up with empty cockpits and they look silly in the air photos...

                    Bravo.


                    LEN
                    Len Buffinton
                    Team Horizon Hobby

                    Comment


                    • #25
                      What I saw from the ground, (photos courtesy of Sharon Shanahan Photography)
                      Pilots are the 1/3 scale Great Planes Pilot Busts.(instructor-( glasses) and student)

                      Click image for larger version

Name:	IMG_0370-1.jpg
Views:	165
Size:	20.5 KB
ID:	4740
                      Click image for larger version

Name:	IMG_0371-1.jpg
Views:	185
Size:	21.4 KB
ID:	4741
                      Click image for larger version

Name:	IMG_0372-1.jpg
Views:	188
Size:	30.3 KB
ID:	4739

                      Comment


                      • #26
                        The Bergfalke @ Montague Glider Festival ready to launch in the "Vintage" class. Lift was spectacular today after a small rain shower
                        Click image for larger version

Name:	Bergfalke Montague 2016.JPG
Views:	168
Size:	139.7 KB
ID:	10545


                        Skid assy to keep the ruder out of the dirt....works pretty well

                        Click image for larger version

Name:	IMG_0798.JPG
Views:	391
Size:	24.2 KB
ID:	10487
                        Last edited by MarnochS; 06-09-2016, 02:02 AM.

                        Comment

                        Working...
                        X