Announcement

Collapse
No announcement yet.

What to use as a tug for my Hemple 50% KA6 ?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • What to use as a tug for my Hemple 50% KA6 ?

    Guys, I have a used Bill Hemple 50% KA6 glider, and need a tug to get it in the air. I'm thinking of buying a Hangar 9 FX-3 Cub, and using a DLE 222 engine. I know Ali at Horizon has used a similar setup, and I think someone else has built something similar. Is this airplane/engine combo a reliable tug? If you have other ideas of a good tug for large gliders, please let me know what you would recommend.

    Thanks,
    Larry Fitch

  • #2
    OK, dumb me! After posting the above question, I see that Scott Marnock has a thread where he assembled one, and built a wonderful model. Nice job. My question remains about the power level needed to tow a 50% glider, if there is something else available. Scott has towed my KA-6 up with his DA-170 powered Bidule-170, but they don't seem to be available any longer.

    Comment


    • kd4jaz
      kd4jaz commented
      Editing a comment
      I have a Bidule 170 for sale........DA 170 with tuned pipes, it will tow anything that is built.
      Marc 407.579.0087 call or text..

  • #3
    Originally posted by LRFitch View Post
    Guys, I have a used Bill Hemple 50% KA6 glider, and need a tug to get it in the air. I'm thinking of buying a Hangar 9 FX-3 Cub, and using a DLE 222 engine. I know Ali at Horizon has used a similar setup, and I think someone else has built something similar. Is this airplane/engine combo a reliable tug? If you have other ideas of a good tug for large gliders, please let me know what you would recommend.

    Thanks,
    Larry Fitch
    Still looking for a towplane? I have a Bidule 170 with a DA 270 with hydraulic brakes....it can tow anything built...Call text 407.579.0087

    Comment

    Working...
    X