Announcement
Collapse
No announcement yet.
Servos power from Rx or battery connection?
Collapse
X
-
Thanks guys. At the moment I don't have a retract. I'm still deciding if I want to do it or not but thanks. I had read that in some of the other like UK international forms, a lot of guys seem to say you needed to do the retract separate. That's easy to do.
-
You might want to wire retract separately. Otherwise it is a "small" scale sailplane and you probably only have smaller wing servos, not a bunch over 150 ozin that could take a lot of power.
Leave a comment:
-
Based on the specs, looks like you're fine plugging them into the receiver.
Leave a comment:
-
Servos power from Rx or battery connection?
I have a 4.5m dg808 I will be building. It will have 9 or more standard size servos. My Rx will be a frisky r18. It has dual xt30 connections.
Should I wire the servos directly to a battery and only have the signal and ground going to the Rx or just not worry about it and plug everything directly into the Rx?Tags: None
Leave a comment: