After a sudden encounter with a tall tree two years ago, my 4.5m Discus went wingless....

Fuse is intact, so time for a winter project : 1/3.3 Ventus 3

Just because the wings are complex....

So Cutting of core happen first, and wings will be build very similar than my Janus (still in the work!)

Here is an idea of the built in dihedral per panels, I will vacuum the two inner panel together and then the two outer panels together. Junction between the two will be done but a Carbon wing joiner


Sans titre by steffruelle, sur Flickr

Sans titre by steffruelle, sur Flickr

Sans titre by steffruelle, sur Flickr

The panels are notched for the servo wire and are notched for the carbon fiber spar cap

Sans titre by steffruelle, sur Flickr

One of the key of success, checking on how panels are joining BEFORE cutting !

Sans titre by steffruelle, sur Flickr

Outer panel

Sans titre by steffruelle, sur Flickr

Inner panel

Sans titre by steffruelle, sur Flickr


All together

Sans titre by steffruelle, sur Flickr






​​​​​​​