If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
sorry not to have seen your message before and hope it's not too late!
Root: 187 mm
Break 1 (Well, there's no real break here, the LE is very slightly curved; so I measured the cord at the two flaps separation): 173 mm
Break 2: 133 mm
Tip (just before the winglet): 47 mm
I have an old Multiplex ASW-22 (yea, it's the 'wanna-be 22) with the 1st gen. Alpina wings. Thinking about making new wings for the fuse. The length of both the MPX and Baudis are pretty much identical. I do have original plans / drawings of the 22 and just wanted to see if there was perhaps an 'easy way out' for me.
thanks
Comment