Announcement
Collapse
No announcement yet.
Search Result
Collapse
172 results in 0.1350 seconds.
Keywords
Members
Tags
-
I've had good luck with the KST X10's mounted in the IDS/servo tray for the discontinued DS125MG's to operate the flaps on my 1/3 Antares. MKS' are nice...
-
FWIW I can easily fit two 6s 5000 packs in the front end of my Antares. I even have my battery tray towards the front half of the canopy opening and the...
Leave a comment:
-
The Jetec units are fully ready to bolt into the model. Servo/servos installed and programmed for proper throws, motor is mounted, fan is balanced and...
Leave a comment:
-
Fyi, that's my Antares at the ARCA field in east Austin. It's a great soaring location with consistent "house" thermals when the wind is from...
Leave a comment:
-
I just kinda ball parked the location by mocking up the fan unit in it's retracted position to give me a decent guess as to where to put the bulkhead,...
Leave a comment:
-
I think the 90mm will ROG(rass) given enough runway length. But when choosing your fan/motor combo, keep in mind that Jetec's ratings on the 90mm are...
Leave a comment:
-
Icare-Icarus sells some. Construction is just a strip of alloy sheet folded in half, roughly mimicking an airfoil's front end where the fold is. Mount...
Leave a comment:
-
It never really hardens so I don't think it effects the strength of the fibers. Cheers!
-
I'd remove a leaf or two from the current springs and add shocks like Tom recommended. But you can't just throw some shocks on there. They need to be...
Leave a comment:
-
I like 80lb Dacron with the glider end of the loop dipped in Elmers to stiffen it up, making it real easy to line up and load into the tow release. Dip...
Leave a comment:
-
I've owned a couple of the portable indoor units that expel their waste heat through a hose in the window, but my experiences have been that they are...
Leave a comment:
-
No way you need that much horsepower to cool that space unless you are using shower curtains or sheets for walls/insulation, especially if the garage...
- Likes 1
Leave a comment:
-
I don't think it's necessary as long as there's a good vent and you aren't running cylinder configurations that put one directly behind the other like...
Leave a comment:
-
Test. I think this should work for everyone. https://www.youtube.com/watch?v=vSTN1X6kt2c
Leave a comment:
-
Test. https://www.facebook.com/saitejak/vi...7473004699004/
Here's a link to the video of a takeoff but I think you still need a Facebook...
Leave a comment:
Leave a comment: