User Profile

[Gordon McLean]

Pulled the fuse together and built the fin in place. I increased the height of the fin by 2 inches.

[Gordon McLean]

Squaring up the tail end and setting the tailpost.

[Gordon McLean]

[Gordon McLean]

[Gordon McLean]

Into the fuse jig...

[Gordon McLean]

While the sides are luan, I ran 1/16" aircraft ply back through the wing saddle, and then laminated 1/4" aircraft ply to create a strong engine...

[Gordon McLean]

[Gordon McLean]

[Gordon McLean]

I had ribs for the Pegasus laser cut using a modified NACA 2415 airfoil. I used the same airfoil that was on a T-170 that my dad built years ago. This...