Tweet
This model is 135-in. in wingspan. It is the Fiberglass+Carbon Standard Version with hollow-molded fiberglass construction that has been reinforced with carbon fiber to provide good stiffness and torsion stability with low weight.
The model is completely built, just needing a radio receiver and to be balanced. The model has all high-voltage top-of-line JR servos installed, with servo frames in the wings. The elevator servo is buried in the rudder post, with the only the rudder servo in the fuselage. There is plenty of room for a release in the nose and an additional servo on the tray.
The model has never been flown and is in perfect condition. It would work well for thermal or slope soaring, and would be an excellent choice for your first aerotow model.
Buyer pays the shipping. It is priced to sell at $750, so it is plus and play. It would be nice to have it stay in the NW.
Also, posted on: https://www.rcgroups.com/forums/show...3-meter-DG-600
The model is completely built, just needing a radio receiver and to be balanced. The model has all high-voltage top-of-line JR servos installed, with servo frames in the wings. The elevator servo is buried in the rudder post, with the only the rudder servo in the fuselage. There is plenty of room for a release in the nose and an additional servo on the tray.
The model has never been flown and is in perfect condition. It would work well for thermal or slope soaring, and would be an excellent choice for your first aerotow model.
Buyer pays the shipping. It is priced to sell at $750, so it is plus and play. It would be nice to have it stay in the NW.
Also, posted on: https://www.rcgroups.com/forums/show...3-meter-DG-600
Comment